On this page
If your dog circles at midnight, sighs down hard, then shifts again in an hour, the bed is often too soft in the middle and too hard to wash. A homemade diy dog bed can match a store bed when you start with support, not shape.
Devin in Athens-Clarke County learned this with Laney, a 9-year-old spayed female Bichon Frise who would settle for 20 minutes, then pace to the cool floor. The fix was not a thicker pillow. It was a firm, flat base she could step onto without sinking, with sides she could lean against.
Make this choice first: flat mat or bolster nest
Watch how your dog falls asleep for two nights. Sprawlers who stretch legs long need a flat mat with room to extend. Curlers who tuck nose to tail and lean against furniture need that same flat base with one bolster along two or three sides.
Choose the wrong shape and even good materials will disappoint. A curler on a flat mat without edges will keep hunting for a wall. A stiff senior sprawler in a deep nest will struggle to stand back up. When in doubt for an aging dog, build flat with a low bolster. It allows both positions and keeps the joints level.

Build a base that stays level under weight
Support means the hips do not sink below the shoulders when your dog lies still. For most homemade beds, that means dense foam, not loose fill.
Cut one piece of firm polyurethane foam or a repurposed crib mattress to size. Aim for 3 to 4 inches thick for medium dogs, 4 to 6 inches for dogs over 60 pounds. Wrap it in a thin batting layer only if the edge feels harsh to your hand. Loose polyfill, old pillows, and bean-bag fill feel cozy at first, then pack down and leave joints on the floor by morning.
The American Kennel Club notes that older and arthritic dogs often rest more soundly on supportive foam with enough room to stretch, rather than soft, unsupportive cushioning. That matches what vets often see in practice: dogs who abandon a puffy bed for carpet usually need firmness, not more softness.
Sew or reuse a tight inner liner around the foam to keep it clean and square. A cheap duvet cover, sewn down to fit, works well.
Add a washable cover and a lean-to bolster
What keeps a homemade bed working is washing. Plan two outer covers you can strip in under a minute. Use tightly woven cotton canvas or denim, with a zipper or wide envelope overlap. Avoid buttons, long loops, and loose trim that catch nails.
For the bolster, sew one long tube about 8 inches in diameter, fill it firmly with washed fiber or foam scraps, and attach it with wide Velcro strips so it can be removed for laundry. Keep it low. Your dog should drape a chin over it without climbing.
Washable bedding matters for skin comfort as well as smell. Guidance on healthy pet hygiene from the Centers for Disease Control and Prevention reminds owners to launder pet bedding regularly to reduce dirt, dander, and pests in the sleep area. For itchy seniors, clean and simple beats scented sprays every time.
If nights still feel restless, keep the same bed and adjust the routine around it. A short evening settle, dim lights, and a familiar toy nearby often help more than rebuilding the bed again, as we describe in Easy DIY Dog Toys You Can Make at Home. For older dogs who wake and wander, pair the firm bed with the gentle evening steps in Supplements for Senior Dog Cognitive Support: What the Research Actually Shows.
When I would not build this bed
This firm, washable design is the wrong call for two dogs. Bessie, a 2-year-old intact female Great Dane in Augusta-Richmond County, chews through canvas in one afternoon when left alone. Bernard did better by pausing the sewing project, using a plain elevated cot until chewing eased, then returning to foam later.
Do not build a foam bed either if your dog is incontinent and you cannot protect the core. Urine-soaked foam cannot be washed clean. Use a waterproof liner inside the cover, or choose a fully hoseable cot until bladder control steadies. Comfort-first care means picking the bed you can keep clean this week, not the perfect bed next month.
A simple build done well — firm base, two washable covers, one low bolster — may help support steadier rest without a store price tag. If pain, panting at rest, or new night waking continues for more than a few nights, call your veterinarian for a comfort check.
Frequently asked questions
How thick should a DIY dog bed be for a senior dog?
Build 3 to 4 inches of firm foam for small and medium dogs, and 4 to 6 inches for large dogs, so hips stay level with shoulders and the dog can stand up without climbing out of a hole.
What fabric works best for a washable dog bed cover?
Use tightly woven cotton canvas or denim with a zipper or envelope closure, and make two covers so one can wash while the other stays on the bed.
Sources
- About Healthy Pets — Centers for Disease Control and Prevention